No one knot is the strongest fishing knot for every job. The winner changes with your line and with what you are tying it to. In the best-known published pull results, the J knot came close to 100% when joining braid to a mono leader. For mono to a lure, the Trilene knot and two clinch knots tied at 96%. For fluorocarbon to a lure, the nonslip loop came out on top.
Below, I sort the strongest knots by line type and add tying tips for each one. I compare published results and the makers’ own instructions. I do not run my own pull trials. For more line, rig and tackle how-tos, browse my fishing guides.
Key takeaways
- No one knot is the strongest. Pick the knot that fits your line type and the connection you are making.
- For hooks and lures, the Palomar is the most forgiving all-round knot. It holds well on mono, fluorocarbon and braid.
- For braid to a leader, the J knot has the highest published figure. Use the FG knot when the joint has to slide through your rod guides.
- Braid is hard on knots. At the lure, the best braid knots kept about 63% of the line’s strength in the Field & Stream pulls.
- Wet every knot, tighten it slowly and count your turns. If a knot looks wrong, cut it and tie it again.
In this guide
- So which fishing knot is actually the strongest?
- Strongest fishing knot by line type
- Strongest knot for tying on a hook or lure
- Palomar or improved clinch?
- Strongest knot for braid to fluorocarbon or mono leader
- Strongest knot for joining two lines
- Strongest knot for heavy line and saltwater leaders
- Strongest double line knot: the Bimini twist
- How to keep the most knot strength
- Quick reference: which knot to use
- Frequently asked questions
So which fishing knot is actually the strongest?
It depends on what you are tying. A knot that keeps almost all of its strength in mono can slip in braid. A knot that joins two mono lines well can be weak when one of them is fluorocarbon.
The clearest numbers come from John Merwin’s machine pull results, published by Field & Stream. Each figure is a percentage of the unknotted line’s strength, which makes it a fair way to compare knots. Field & Stream sorts the knots into two groups. Splicing knots join two lines. Terminal knots tie line to a hook or lure.
Three things decide how strong a knot is on the water:
- Break strength: how much of the line’s strength the knot keeps before it fails.
- Slip resistance: whether it holds on slick braid or stiff fluorocarbon.
- How easy it is to tie well: a strong knot tied badly is a weak knot.
One caution before the numbers. Each figure comes from one set of pulls on one line at one weight, and another set of pulls could give different results. So read a one-point gap, like the nonslip loop’s 83% against the Palomar’s 82%, as a tie.
Strongest fishing knot by line type
These are the top results from the Field & Stream data, sorted by connection. Where the source names the line, I have included it.
| Connection | Top result | Runner-up or note |
|---|---|---|
| Braid to mono leader (30 lb FireLine to 10 lb mono) | J knot, close to 100% | Harder to tie than most joins. Practice it at home first |
| Fluorocarbon to braid | J knot, 83% | 4-turn surgeon’s 80%, 5-turn double uni 75% |
| Fluorocarbon to mono (10 lb InvizX to 10 lb Trilene Big Game) | Blood knot, 83% | 3-turn Seaguar knot 66%, 3-turn surgeon’s 65% |
| Mono to lure | Three-way tie at 96%: Trilene knot, 6-turn clinch, 5-turn improved clinch | Palomar 89%. The two clinch knots only reached 96% when tied with extreme care |
| Fluorocarbon to lure | Nonslip loop, 83% | Palomar 82%, improved clinch 75% |
| Braid to lure (14 lb FireLine) | Palomar, 63% | Berkley Braid knot 62%. An 8-turn clinch slipped at about 10 lb of force |
The braid to lure numbers are much lower than the rest. Braid is thin and slick, so even the best knots keep less of its rated strength. Those pulls used 14 lb braid, a different line from the mono rows, so read the gap as a trend and not an exact comparison. My post on the best knot for braided line goes deeper on terminal knots for braid.
Strongest knot for tying on a hook or lure
For mono, three knots tied at 96%: the Trilene knot, the 6-turn clinch and the 5-turn improved clinch. The clinch knots only got there with extreme care. That makes the Trilene the safer pick when you are tying fast. Field & Stream covers the Trilene knot in its terminal knots section.
For fluorocarbon, use the nonslip loop or the Palomar. Their results are close enough to call a tie. The loop also lets a lure swing freely. My best knot for fluorocarbon post covers more options for this line.
For braid, use the Palomar or the Berkley Braid knot. Skip the plain clinch on braid, because it slipped at very low force.
The Palomar is the knot I would teach first. It works on almost any line and is easy to tie well. Berkley gives these steps:
- Double about 6 inches of line.
- Pass the loop through the hook eye.
- Tie a loose overhand knot with the doubled line.
- Pass the loop over the hook.
- Wet the knot, then pull it tight.
My full walkthrough is in how to tie a Palomar knot.
Palomar or improved clinch?
For most anglers, the Palomar. On mono the two can finish even, but only if you tie the clinch with great care. On fluorocarbon the Palomar kept 82% and the improved clinch kept 75%. Berkley also does not recommend the improved clinch for lines heavier than 30 lb.
Strongest knot for braid to fluorocarbon or mono leader
In the Field & Stream data, the J knot led both braid to leader pairings. It came close to 100% from braid to mono and kept 83% from fluorocarbon to braid.
How to learn the J knot
The J knot is less well known than the FG, and the source notes it is harder to tie. The best place to learn it is the Field & Stream J knot tutorial, which sits in the splicing knots section next to the pull results. Follow it with scrap line at home a few times before you trust it on the water. Wet the wraps and pull all four strands evenly as you seat it, the same as any splice.
Why many anglers still pick the FG knot
The case for the FG comes from Salt Strong. Luke Simonds reported that the double uni and Crazy Alberto were up to 30% weaker than the FG in his own pulls. Those were separate pulls on different lines. They show where the FG ranks against those two knots, but they give no figure to set beside the J knot.
The bigger reason is profile. The FG wraps the braid around the leader instead of tying the two lines into each other. That keeps the joint slim, so it slides through rod guides. This matters when your leader is long enough that the knot sits inside the guides when you cast. If the knot stays outside the rod tip, the J knot’s higher published figure makes it a strong choice.
My braid to fluorocarbon knot guide covers the FG step by step. If you still need leader material, see my roundup of the best fishing leaders of 2026.
Strongest knot for joining two lines
When joining 10 lb InvizX fluorocarbon to 10 lb Trilene Big Game mono, the blood knot led at 83%. That covers one light pairing, so treat it as a guide for similar lines and not a rule for every weight. The surgeon’s knot is quicker to tie but kept only 65% in that pairing.
The uni to uni is still popular because it is simple and works across line types. Berkley says it preserves up to 90% of line strength. For every line to line option, see how to tie fishing line together.
Strongest knot for heavy line and saltwater leaders
The pull figures above use light and medium line, from 10 lb to 30 lb. There are no comparable published figures here for heavy leader, so this section is about what anglers commonly use and what the makers say.
Start with the maker notes. Berkley does not recommend the improved clinch for lines heavier than 30 lb. Mustad’s Tuf-Line page says the Palomar suits almost any use except extremely heavy leader lines. So on heavy gear, both of the usual light tackle knots drop out.
Here is what anglers reach for instead:
- San Diego jam: a common choice for tying heavier mono or fluorocarbon leader to a hook or lure in saltwater. It was also a go-to in the earlier version of this post for heavy lures and strong fish.
- Crimps on very heavy mono: when leader gets too thick to knot neatly, many offshore anglers crimp a sleeve instead of tying a knot. Match the sleeve to your leader’s diameter and use a proper crimping tool.
- FG or PR knot for heavy braid to leader: both wrap the braid around the leader for a slim joint. The PR knot is tied with a bobbin tool.
- Bimini twist first: many offshore anglers double the main line with a Bimini, then tie the leader to that loop.
Whatever you pick, read the knot advice from the company that makes your line. It knows how its material grips.
Strongest double line knot: the Bimini twist
A Bimini twist is not a splice. It doubles the end of your main line into a long, strong loop, and you then tie that loop to a leader or to terminal tackle. Its results measure a different job, so do not compare them row by row with the splicing table above.
Sport Fishing ran a contest of 32 knots, updated in March 2025. A 40-turn Bimini twist reached 100.9%, the top result in braid. Braid knots in that contest ranged from 32.5% to 100.9%, which shows how much the choice of knot matters on braid. Two results stand out:
- A 50-turn Bimini dropped to 58%. More turns did not mean more strength.
- A Bimini with Super Glue came in at 73%. That suggests glue can weaken braid knots.
Is a 100% fishing knot real?
Not one you can count on. Salt Strong calls the 100% knot a myth. Even the J knot’s near-100% and the Bimini’s 100.9% came from one careful set of pulls on one line, not from a typical tie on the water. The Bimini also fell to 58% with ten more turns. Expect any knot to cost you some strength, and pick the one that costs the least for your setup.
How to keep the most knot strength
- Wet it first. The Utah Division of Wildlife Resources warns that friction heat can stretch and weaken the line. Wetting the knot cuts that heat.
- Tighten slowly and evenly. Pull the standing line and the tag together so the wraps seat cleanly.
- Count your turns. Utah DWR uses 5 to 6 wraps for the improved clinch and 6 for the uni.
- Practice at home. The FG and J knot are hard to learn with cold, wet hands.
Quick reference: which knot to use
- Hook or lure on mono: Trilene knot, or a carefully tied clinch.
- Hook or lure on fluorocarbon: nonslip loop or Palomar.
- Hook or lure on braid: Palomar or Berkley Braid knot.
- Braid to mono or fluorocarbon leader: J knot, or FG knot when the joint passes through your guides.
- Light mono to light fluorocarbon: blood knot.
- Quick splice on any line: uni to uni.
- Heavy leader: San Diego jam, a crimp on very heavy mono, or your line maker’s recommended knot. Skip the improved clinch above 30 lb.
- Double line for offshore: Bimini twist.
Knots are only one part of a day on the water. License, tackle and gear rules differ by state, so check your state fish and wildlife agency’s current rules before you go. Many agencies also publish beginner guides, such as Utah DWR’s knot tutorial.
Frequently asked questions
Does super glue make a fishing knot stronger?
Not reliably. In one published test, a glued Bimini twist in braid was weaker than the same knot without glue. If a knot looks loose, cut it and tie it again.
Why use a nonslip loop knot?
It led the fluorocarbon to lure results in the Field & Stream data. The open loop also lets a lure move freely instead of being cinched tight to the eye. It suits fluorocarbon tied straight to a lure.
Why isn’t every splicing knot right for every line?
Each line type grips a knot in its own way. Joining fluorocarbon to mono, the blood knot kept 83% while the 3-turn surgeon’s kept 65%. Braid is slicker again, so it needs knots built to hold it.
How can I tell if a knot was tied right?
The wraps should sit snug and even, with no kinks or curls in the line. On a Palomar, Mustad says to cut it and tie it again if the two strands cross inside the hook eye. If you are unsure, retie it before you cast.




